The HID VertX V200 (Part 70200) is an input monitor interface that connects up to 16 supervised input circuits, monitoring and reporting normal, off-normal, and alarm states for each. It connects to the V1000 master controller via high-speed RS-485 network, with firmware updates downloadable via the network. Power supply: 9-18 VDC at 100 mA. One TCP/IP address covers up to 32 interfaces via the V1000.

The V200 input monitor interface connects up to 16 supervised input circuits. Each input point monitors and reports normal, off-normal, and alarm states. The V200 features on-board flash memory, allowing program updates to be downloaded through the network. The V200 connects to the V1000 via a high speed RS-485 network.

The V1000, in turn, communicates with the system host via industry standard TCP/IP protocol, over 10/100 Mbps Ethernet, or the Internet. This architecture minimizes the impact on corporate LANs, by using only one TCP/IP address for every 32 interfaces, and by handling low-level transactions on the RS-485 network.

• V100 - Door/Reader Interface
• V200 Input Monitor Interface
• The V200 connects up to 16 configurable input circuits.
• Base Part Number • 70200
• Connects to the V1000 via a high speed RS485 network
• Alarm input processing for up to 16 supervised input circuits
• Monitors & reports normal,Off/Normal & tamper status
• Flash memory for downloading program updates
• Power supply 9-18 VDC @ 100 mA

SUPPLIED BY

Cybernetics Software Pvt.Ltd.

Pune,Maharastra

www.csplsoftware.com